The m8 circular connectors usually have four or more pins or pins with a distance of 8 mm between each pin, hence the name M8 Connectors. They are typically used to transmit low voltage and low power signals, such as sensor signals. The connectors can also be sealed with rings as required to provide water and corrosion resistance.
Screw locking according to DIN EN 61076-2-104
Pre-molded with cables or soldered with single wires for immediate use
Sealed on the single wire side for optimum leak-tightness
Panel mount receptacles: rear/front mount, vertical/angled
Versions: 3, 4, 5, 6, 8 pins
4 pins. A coded for Ethernet and 5 pin B coded for DeviceNet
Field assembly type: 3, 4 pins
Versions with shielding available
Angled connector adjustable
Degree of protection IP67
Customer specific assemblies and single wire lengths available
Automation Technology M8 Sensor Connector
M8 panel receptacle, rear mount, female, contacts: 6, PCB dip-solder connection, straight, IP67
M8 pre-molded cable connector, female, contacts: 5, solder connection, B code, straight, IP67
M8 Pre-molded Cable Connector, Male, Contacts: 6, Solder Connection, Straight, IP67
M8 pre-molded cable connector, male, contacts: 5, solder connection, B code, right angled, IP67
M8 Pre-molded Cable Connector, Female, Contacts: 3, Solder Connection, Straight, IP67
M8 pre-molded cable connector, male, contacts: 4 solder connection, straight, IP67
M8 panel receptacle, rear mount, female, contacts: 8, PCB dip-solder connection, straight, IP67
M8 Panel Receptacle, Rear Mount, Male, Contacts: 6, PCB Dip-solder Connection, Straight, IP67
M8 Pre-molded Cable Connector, Male, Contacts: 8, Solder Connection, Straight, IP67
M8 panel receptacle, rear mount, male, contacts: 8, PCB dip-solder connection, right angled, shielded, IP67
M8 Panel Receptacle, Rear Mount, Male, Contacts: 8, PCB Dip-solder Connection, Straight, IP67
| PRODUCT | PRODUCT NAME | Specification | QUANTITY | OPERATE |
|---|
